Wiley-ISTE

  • Umts

    Sanchez

    During the first decade of this new millennium, it is estimated that more than EUR100 billion will be invested in the third generation (3G) Universal Mobile Telecommunications System (UMTS) in Europe. This fact represents an amazing challenge from both a technical and commercial perspective. Written by experts in the field, this book gives a detailed description of the elements in the UMTS network architecture: the User Equipment (UE), the UMTS Radio Access Network (UTRAN) and the core network. The completely new protocols based on the needs of the new Wideband Code Division Multiple Access (WCDMA) air interface are highlighted by considering both Frequency- and Time-Division Duplex modes. The book further introduces the key features of existing topics in Releases 5, 6 and 7.

  • This helpful resource covers a large range of information regarding electrical actuators. In particular, robustness, a very problematic issue, is fully explored in a dedicated chapter. The text also deals with he estimate of non-measurable mechanical variables by examining the estimate of load moment, then observation of the positioning of a command without mechanical sensor. Finally, it examines the conditions needed to measure variables and real implementation of numerical algorithms. This is a key working resource for electrical engineers.

  • This comprehensive scientific work embraces, within the generic theme of "educations, territorialities and territories", the vast majority of different facets of the complex relationships between educations and territories that have developed over time. It sheds an original light on the many - and, for some, new - interactions between territories-territories, on the one hand, and educations, on the other hand, which have recently been identified and analyzed. Beyond this main objective, it contributes to improving the fine and differentiated understanding of the concept of territory in the sciences of education and training and, more importantly, it brings innovative developments to the still embryonic theorization of the complex relations between educations. and territories-territorialities. This book shows, in particular, through its surveys, its analyzes and its results, that within all the multiple influences attributed to the different dimensions of the territories, the very discrete territoriality - falling within the symbolic territory - is perhaps finally the the most important territorial vector in terms of education in certain areas (rural Montagnards, for example), particularly as regards educational and vocational guidance, but not only. Lastly, it is not uninteresting to note that the theme it bears is spreading more and more today beyond scientific circles: the problem of inequalities in education and orientation of territorial origin is fueling - recently - the controversies and the reflections of the French educational policy which is thus sometimes echoed - in declarative terms essentially for the moment! - scientific advances in this area

  • Networks are now embedded in daily life thanks to smaller, faster, inexpensive components that are more powerful and increasingly connected. Parallel to this quantitative explosion of communication networks, technology has become more complex. This development comes with challenges related to management and control, and it has become necessary to manage the service level demands of the client to which the service provider commits. Different approaches to managing one or more service level components in different emerging environments are explored, such as: the Internet of Things, the Cloud, smart grids, e-health, mesh networking, D2D (Device to Device), smart cities and even green networking. This book therefore allows for a better understanding of the important challenges and issues relating to Quality of Service (QoS) management, security and mobility in these types of environment.

  • The book deals with requirements engineering in the context of System Engineering. He proposes a method to guide this activity engineering. The method is supported by the SysML modeling language. A first chapter aims to present the context and the associated definitions, to position the requirements engineering in the processes system engineering, to define the modeling and its contributions, and to make the link with the management of IS projects. The second chapter is devoted to the proposed method for implementing the requirements engineering subprocesses. Each of the 8 activities the component is first described before specifying how the SysML language can be exploited to achieve it effectively. Proposal for a book Please fill out the questionnaire below and send it back to Chantal Menascé: c.menasce@iste.co.uk The 3rd chapter is an application of the method to define the needs of the stakeholders of a system. The example is built on the basis of the RobAFIS'2018 competition. The 4th chapter continues the application of the method in the continuity of the IS processes to define the requirements of the same system. The appendices present at the same time a toolbox to realize the engineering of the requirements but also the complete results of engineering in Chapters 3 and 4.

  • The book studies the way the luxurious fashion develops re-presentational politics by reinvesting symbolic fields such as art and culture, religion and the sacred as well as politics, in other words fields that represent a certain common pattern of life and a common interest. I develop a semiotic approach of the way art exhibitions, print and audiovisual advertising, publishing and distribution politics as well as special ready to wear collaborations with arts such as Jeff Koons reveal the fashion industry's gesture of pretending being a non-commercial structure especially in order to cover up its industrialisation and banalization process

  • The humanities and social sciences are interested in the cybersecurity object since its emergence in the security debates, at the beginning of the 2000s. This scientific production is thus still relatively young, but diversified, mobilizing at the same time political science, international relations, sociology , law, information science, security studies, surveillance studies, strategic studies, polemology. There is, however, no actual cybersecurity studies. After two decades of scientific production on this subject, we thought it essential to take stock of the research methods that could be mobilized, imagined and invented by the researchers. The research methodology on the subject "cybersecurity" has, paradoxically, been the subject of relatively few publications to date. This dimension is essential. It is the initial phase by which any researcher, seasoned or young doctoral student, must pass, to define his subject of study, delimit the contours, ask the research questions, and choose the methods of treatment. It is this methodological dimension that our book proposes to treat. The questions the authors were asked to answer were: how can cybersecurity be defined? What disciplines in the humanities and social sciences are studying, and how, cybersecurity? What is the place of pluralism or interdisciplinarity? How are the research topics chosen, the questions defined? How, concretely, to study cybersecurity: tools, methods, theories, organization of research, research fields, data ...? How are discipline-specific theories useful for understanding and studying cybersecurity? Has cybersecurity had an impact on scientific theories?

  • Manufacturing industries strive to improve the quality and reliability of their products, while simultaneously reducing production costs. To do this, modernized work tools must be produced; this will enable a reduction in the duration of the product development cycle, optimization of product development procedures, and ultimately improvement in the productivity of design and manufacturing phases. Numerical simulations of forming processes are used to this end, and in this book various methods and models for forming processes (including stamping, hydroforming and additive manufacturing) are presented.  The theoretical and numerical advances of these processes involving large deformation mechanics on the basis of large transformations are explored, in addition to the various techniques for optimization and calculation of reliability. The advances and techniques within this book will be of interest to professional engineers in the automotive, aerospace, defence and other industries, as well as graduates and undergraduates in these fields.

  • The question of trust is crucial in the field of health. First, because health is indicative of particularly strong issues at the societal, regulatory, institutional or individual levels; secondly, because the boundaries between specialized information validated by legitimate instances and uncommitted information have become permeable; finally, because it appears to be central within relations between actors in the field. In this book, we propose to address the trust in terms of the information and communication phenomena that are at work in the health sector, and to look at the process of building the legitimacy of information in the health sector. health.

  • This book is the third in a series dedicated to aerospace actuators. It uses the contributions of the first two volumes to conduct case studies on actuation for flight controls, landing gear and engines. The actuation systems are seen in several aspects: signal and power architectures, generation and distribution of hydraulic or mechanical power, control and reliability, and evolution towards more electrical systems. The first three chapters are dedicated to the European commercial airplanes that marked their era: Caravelle, Concorde, Airbus A320 and Airbus A380. The final chapter deals with the flight controls of the Boeing V-22 and AgustaWestland AW609 tiltrotor aircraft. These address concerns that also apply to electromechanical actuators, which should be fitted on more electrical aircraft in the future. The topics covered in this series of books constitute a significant source of information for individuals and engineers from a variety of disciplines, seeking to learn more about aerospace actuation systems and components.

  • In today's business environment, as organizations constantly seek to growth and develop through the optimization of their innovative and creative potential, understanding the critical issues and management practices in R & D is essential. This book provides a critical revaluation of the state of the art issues and concepts in R&D management. The views expressed are those of leading French researchers and professionals in this field, fed by empirical studies in national and international firms.

  • Society 5.0

    Bruno Salgues

    Following the rapid development of connected technologies, which are now highly sophisticated and spread across the globe, Society 5.0 has emerged and brought with it a dramatic societal shift.  In 1998, Kodak, the world leader in photographic film, had 170,000 employees. It thus seemed unthinkable that just 3 years later, the majority of people would stop taking photographs to paper film and that Kodak would have disappeared. These are the stakes of this new society that is taking shape.  This book, which does not seek to critique current politics, management or marketing literature, aims to fight against the excesses of this often-misunderstood Society 5.0 and to present the ideas and associated technologies that comprise it, all working towards societal improvement. Among these technologies, artificial intelligence, robotics, digital platforms and 3D printing are undoubtedly the most important, and thus receive the greatest focus.

  • This book will present a complete modeling of the human psychic system that allows to generate the thoughts in a strictly organizational approach that mixes a rising and falling approach. The model will present the architecture of the psychic system that can generate sensations and thoughts, showing how one can feel thoughts. The model developed into an organizational architecture based on massive multiagent systems. The architecture will be fully developed, showing how an artificial system can be endowed with consciousness and intentionally generate thoughts and, especially, feel them. These results are multidisciplinary, combining both psychology and computer science disciplines.

  • This volume comprises three parts: 1) from local to global, 2) what type of sustainable management? 3) territorial approaches. The first chapter demonstrates, from the French example, that better soil management is a societal issue. At the global level, the second chapter raises the question of land grabbing and land use conflicts. This book also raises the question of the legal status of the soil. It then shows how soils need to be integrated when defining sustainable agricultural systems. French and European examples illustrate how taking environmental problems into account depends as much on their acuity as on how problems are perceived by public and private, social or economic actors. Therefore, it is important to promote co-diagnosis involving the scientific community and the various other actors in order to improve the regulation on soils. This multi-actor soil governance is facilitated by the use of simple soil quality indicators. Finally, examples in France and Vietnam show how soils are to be considered as territorial commons within landscapes. This last chapter recommends in particular to put an end to the absolute right of soil ownership and to distribute the usufruct of land between various private and public beneficiaries.

  • Smart Cities

    Claude Rochet

    The intelligence of a city is the capacity to learn: to learn the past, its history and the culture of its territory. Unlike the smart city, we do not build a city from scratch and there is nothing, there is no smart city standard car intelligence is measured this ability to fit into a territorial dynamic, a story and a culture. Continuous learning through instantaneous feedback provides the digital to understand and map the urban system and driver.

  • While the topic of heat and mass transfer is an old subject, the way the book introduces the concepts, linking them strongly to the real world and to the present concerns, is particular. The scope of the different developments keeps in mind a practical energy engineering view.

  • In what sort of assemblages, the strategies and digital policies in organization are made?   Beyond digital mantras and management slogans/fictions, what is the concrete factory of information management system?  What are the parts of the human and no human actors? Is it possible to create a new approach to understand how work change (or not), to explore the potential for a social and cognitive innovation way, considering simultaneously the increase of Data Management and the organizational analytics?

  • The purpose of this book is to draw up a picture of the transformations in the innovation systems induced by globalization - or globalization. We understand the latter as the existence of new macroeconomic solidarities. These are attested since about the middle of the 1980s, with the observation of a tripolar world drawn up by Kenichi Ohmae. The book intends to explain all theories of globalization, as well as to clarify its relations with innovation. It constitutes an unprecedented synthesis on this theme, illustrated by examples from many sectors of activity.

  • Technological changes have often produced important social changes that translate into spatial and planning practice. Whereas the intelligent city is one of the unavoidable and even dominant concepts, digital uses can influence urban planning in four different directions. These scenarios are represented by a compass composed of a horizontal axis opposing institutional and non-institutional actors, and a second axis with open and closed opposition.

  • This book will teach you how to take advantage of the JavaScript language to process data provided on the Internet. Much attention is given to the main JavaScript backbone: prototype based objects, and functional capabilities, while common features (loops, etc.) are summarized in a few cheat-sheets. Only operational features are detailed through the coding of several applications -the second and largest part of the book-, on free-access datasets (e.g. World Bank). It includes: cartography (SVG or API's based), data-sheets access (via Ajax or Jsonp), video data and post-synchronization, and animation examples.

  • This is the first book of a series aiming at setting the basics for energy engineering. This book presents the fundamentals of heat and mass transfer with a step-by-step approach, based on material and energy balances. While the topic of heat and mass transfer is an old subject, the way the book introduces the concepts, linking them strongly to the real world and to the present concerns, is particular. The scope of the different developments keeps in mind a practical energy engineering view.

  • Logistics

    Joelle Morana

    As a first destination for Bac + 4 and above students, but also for teachers and researchers, this book presents in 42 sheets - from 4 to 5 pages each - the fundamental elements to the setting up of a logistics. Indeed, many books exist in logistics, but they usually focus on the development of a particular theme. In this case, the logistics in 42 sheets offers an overview of the key elements to consider for the implementation of a logistics. And to go further, each sheet offers a bibliography "development" themes and subtopics.

  • The modelling tools for soils and rocks require more and more specific parameters not always available from the standard or usual survey campaigns, this generally for reasons of delay or costs. The use of correlations to solve the gap between available parameters and the required ones is a common practice. Many of them exist but are spread throughout numerous papers or books. The aim of this formulary is to provide a large synthesis of the existing correlations accumulated by the authors during more than 40 years academic and consulting careers.

  • This volume of three books presents recent advances in modelling, planning and evaluating city logistics for sustainable and liveable cities based on the application of ICT (Information and Communication Technology) and ITS (Intelligent Transport Systems). It highlights modelling the behaviour of stakeholders who are involved in city logistics as well as planning and managing policy measures of city logistics including cooperative freight transport systems in public-private partnerships. Case studies of implementing and evaluating city logistics measures in terms of economic, social and environmental benefits from major cities around the world are also given.  

empty